- All products
- Single sided tapes
- Tissues
- Viscose Fabric Adhesive Tape for Automotive Applications
- Tissues
Viscose Fabric Adhesive Tape for Automotive
ATyT’s viscose fabric adhesive tape for automotive use is a self-adhesive textile solution designed for the mechanical protection, bundling and securing of electrical cables in vehicles. Made with a textile backing known as viscosilla and coated with a rubber adhesive, it combines flexibility, strength and ease of application in wiring manufacturing and assembly processes.
Especially suited as a viscose tape for automotive use, it allows sets of conductors to be wrapped, cable harnesses to be organized, and areas exposed to friction to be protected. Its flexible structure makes it easy to adapt to different diameters, curves and routes, providing a durable and conformable wrap.
The rayon fabric tape has a total thickness of 300 µm, a tensile strength equal to or greater than 15 N/25 mm and an adhesion to steel equal to or greater than 7 N/25 mm. These characteristics make it suitable for applications that require a combination of adhesion, flexibility and mechanical protection of the wiring.
In the automotive industry, viscose tape for automotive cables is used to organize and secure sets of conductors in different areas of the vehicle. Its textile backing allows wraps to be adapted to the geometry of the cable harnesses, making it easier to integrate into assembly processes.
Thanks to its adaptability, the conformable fabric tape for wiring is suitable for applications in tight spaces, curved routes and areas where cables must be kept bundled without making installation harder.
The abrasion-resistant tape helps protect conductors against wear caused by contact with other vehicle components. This property is especially useful in applications where cable harnesses may be subject to movement, vibration or friction during operation.
The adhesive tape for vehicle wiring also has a service temperature range of −20 °C to +105 °C, according to the values stated in the technical data sheet. This makes it possible to consider its use in different areas of the car, provided its compatibility with the actual working conditions is verified.

The tape for bundling vehicle cables also stands out for its ease of handling. Its backing can be torn by hand, allowing quick cuts and adjustment of the tape length needed during assembly operations.
Within the automotive sector, this product may also match searches for cotton fabric tape for automotive use and rayon fabric tape for automotive use, names commercially associated with certain textile tapes used for wiring protection. However, the exact composition of the backing must be confirmed before treating cotton and viscose as technically equivalent.
Thanks to its combination of mechanical strength, flexibility and adhesion, ATyT’s tape for automotive cable harnesses is a solution for component manufacturers, wiring suppliers and industrial companies that need to protect, organize and secure sets of conductors during vehicle manufacturing and assembly processes.
ADHESIVE PROPERTIES | VALUES |
Total thickness | 300 µm |
Tensile strength | ≥ 15 N/25mm |
Adhesion to steel | ≥ 7 N/25mm |
Shear resistance | ≥ 60 min |
Rolling Tack Ball | ≤ 8 cm |
Application temperature range | [+5ºC - +35ºC] |
Service temperature range | [-20ºC - +105ºC] |
Advantages That Make the Difference
- Mechanical protection of wiring: the textile backing provides a durable wrap that helps protect cable harnesses against friction and abrasion when used in vehicles.
- Flexibility and conformability: its structure adapts to different diameters, curves and wiring routes, making installation easier in tight spaces and areas with irregular geometry.
- Bundling and organizing electrical cables: keeps different conductors together with a flexible wrap, making it easier to manufacture cable harnesses and carry out automotive assembly processes.
- Temperature resistance: has a service temperature range of −20 °C to +105 °C, making it possible to consider its use in different areas of the vehicle depending on the thermal conditions of each application.
- Easy manual application: its backing can be torn by hand, making it easier to adjust the length and handle the tape during assembly operations.
- Good adhesion and dimensional stability: the rubber adhesive provides bonding on compatible surfaces, while the dimensional stability of the backing helps keep the wrap in place during use.
Application Conditions
To ensure optimal tape performance:
- Check that surfaces are clean, dry and free of dust, grease, oil or substances that could impair adhesion.
- Check beforehand that the natural rubber adhesive is compatible with the materials making up the wiring.
- Select the length of tape needed according to the diameter of the harness and the area to be protected.
- Apply the tape around the conductors while maintaining even tension, avoiding deformation or excessive compression of the wiring.
- Wrap with an overlap suited to the securing and mechanical protection requirements.
- Apply enough pressure during application to promote adhesion.
- Avoid direct and prolonged exposure to UV rays, as the product is not designed for these conditions.
- Check that working temperatures are compatible with the stated performance.
- In low- and medium-voltage electrical applications, make sure the tape is used only for functions compatible with the design and safety requirements of the installation.

Protecting Automotive Cable Harnesses with Viscose Tape
A manufacturer of automotive electrical components needed to improve the protection and organization of cable harnesses installed in different areas of the vehicle, especially in the engine compartment. The main challenge was to reduce the wear caused by friction and vibration, keeping the conductors properly bundled and protected without making installation harder in tight spaces, curved routes and hard-to-reach areas.
After analyzing the needs of the application, ATyT proposed using its viscose fabric adhesive tape for automotive use, with a 300 µm textile backing and rubber adhesive. Its combination of flexibility, abrasion resistance and adaptability makes it possible to create durable wraps over sets of conductors of different diameters. In addition, its service temperature range of −20 °C to +105 °C makes it possible to consider its use in different areas of the vehicle, as long as the actual working conditions are compatible with the product specifications.
During the assembly process, operators applied the viscose tape for automotive cables directly onto the conductor bundles, taping them evenly and in line with their geometry. As shown in the image, the tape allows cables to be wrapped and kept bundled, providing additional mechanical protection against contact with other components.
Its conformable backing makes application easier on curves and complex routes, while the ability to tear it by hand speeds up the work without the need for cutting tools.
The solution improved the organization and securing of the wiring, making it easier to integrate into vehicle manufacturing and assembly processes. Thanks to its resistance to friction, flexibility and ease of application, the tape for automotive cable harnesses was put forward as an alternative for future conductor protection and bundling applications, helping to optimize taping operations and maintain a durable, uniform wrap during use.
Frequently Asked Questions
Viscose tape for automotive use is mainly used to bundle, secure and protect electrical cable harnesses in vehicles. Its flexible textile backing allows conductors to be wrapped and provides additional mechanical protection against friction and abrasion.
The tape for automotive cable harnesses can be used in certain areas of the engine compartment, provided that the temperature conditions, exposure to fluids and mechanical demands are compatible with the characteristics of the product. Preliminary testing is recommended to validate each application.
Viscose tape for automotive use is suitable for manufacturing and bundling cable harnesses in the production of vehicle wiring looms, protecting wiring in the passenger compartment, behind panels and under the dashboard, and providing mechanical protection against abrasion in areas where conductors may rub against other components. Its conformable textile backing also makes it easier to secure and organize cables on routes with curves and complex geometries, as well as to assemble electrical and electronic systems during vehicle manufacturing. For engine compartment applications, it is advisable to check beforehand that the actual conditions of temperature, fluid exposure and mechanical stress are compatible with the product specifications.
The rayon fabric tape for automotive use has a service temperature range of −20 °C to +105 °C. The recommended temperature during application is between +5 °C and +35 °C.
Yes. The abrasion-resistant tape features a textile backing that helps protect conductors against wear caused by contact and friction with other vehicle components.
Yes. The conformable fabric tape for wiring can be applied by hand, adapting to different diameters and routes. In addition, its backing can be torn by hand, making it easier to cut and adjust the length during assembly operations.
The main difference is the composition of the backing. Cotton is a natural fiber, while viscose or rayon is a regenerated cellulosic fiber. Although searches for cotton fabric tape for automotive use and rayon fabric tape may refer to similar applications, they should not be considered equivalent materials without verifying their composition and performance.
Its textile backing can help dampen noise generated by contact and vibration of cable harnesses against other components. However, there is no specific acoustic rating available to quantify this performance.
ATyT’s adhesive tape for vehicle wiring is usually supplied in rolls 25 meters long, in widths of 15, 19, 25 and 50 mm. Options for customizing the core, labeling and product presentation are also available on request, depending on each customer’s needs.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.