- All products
- Single sided tapes
- PET
- Silicone polyester adhesive tape
- PET
PET tape with silicone adhesive
The ATyT PET adhesive tape with silicone, available in thicknesses of 60 µm and 80 µm, is designed for industrial applications that require resistance to high temperatures, good adhesion and stability during manufacturing processes. Made with a polyester (PET) backing and a pressure-sensitive silicone adhesive, this high-temperature tape offers a technical solution for masking, surface protection and material splicing.
Thanks to its polyester backing and silicone adhesive, both versions offer a combination of thermal resistance, chemical resistance and flexibility, maintaining good adhesion even on siliconized surfaces. In addition, the PET tape with silicone can be removed without leaving adhesive residue under suitable application conditions, making masking and temporary protection processes easier.
The 60 µm PET tape with silicone adhesive stands out for its lower thickness and translucent backing, which makes identification and positioning on application surfaces easier. It is especially suitable for masking during high-temperature powder coating processes, insulation of motors, transformers and coils, as well as splicing on non-stick materials such as siliconized paper. Its technical data sheet indicates a maximum temperature resistance of 220 °C.
Meanwhile, the 80 µm PET tape with silicone adhesive has a thicker backing and good resistance to abrasion and chemicals. It is mainly designed for masking parts subjected to high-temperature processes and for splicing adhesive rolls and reels. It can also be used in powder coating operations, metal surface protection and holding parts or vacuum bags during composite manufacturing processes.
Both versions of silicone polyester adhesive tape offer a tensile strength of 46 N/cm, adhesion to steel equal to or greater than 3.2 N/cm and a dielectric strength of 5 kV, according to their respective technical data sheets. These properties allow them to be used in various insulation, assembly, industrial masking and component protection applications.
At ATyT we offer PET tape with silicone adhesive in 60 and 80 µm in different widths and colors, with customization and packaging options adapted to the needs of manufacturers, industrial converting companies and professionals who require adhesive solutions resistant to high temperatures.
At ATyT we offer PET tape with silicone adhesive in 60 and 80 µm in different widths and colors, with customization and packaging options adapted to the needs of manufacturers, industrial converting companies and professionals who require adhesive solutions resistant to high temperatures.
ADHESIVE PROPERTIES | VALUES | VALUES |
Backing thickness | 25 µm | 50 µm |
Total thickness | 60 µm | 80 µm |
Tensile strength | 46 N/cm | 46 N/cm |
Rolling Tack Ball | 50% | 50 % |
Adhesion to steel | ≥ 3,2 N/cm | ≥ 3,2 N/cm |
Maximum temperature resistance | 220 ºC | 200 ºC |
Dielectric strength | 5 kV | 5 kV |
Advantages that make the difference
- High resistance to high temperatures, suitable for industrial masking, powder coating and protection of surfaces exposed to heat.
- Excellent adhesion on siliconized surfaces, thanks to its pressure-sensitive silicone adhesive, which provides reliable bonding even on non-stick materials.
- Good chemical and mechanical resistance, combining the stability of the PET backing with abrasion resistance and flexibility for different industrial applications.
- Clean removal without adhesive residue, making masking and temporary surface protection easier under suitable application conditions.
- Available in 60 and 80 µm thicknesses, with good electrical insulation properties and different application, customization and packaging options.
Application conditions
To ensure optimal tape performance:
- The application surface must be clean, dry and free of dust, grease, oil or any substance that may impair adhesion.
- Uniform pressure must be applied when placing the tape to promote contact between the silicone adhesive and the surface.
- Insufficient pressure may affect the adhesive properties and the final appearance of the applied tape.
- It is recommended to select the 60 or 80 µm thickness according to the thermal and mechanical requirements of each application, checking compatibility with the surface and process conditions beforehand.
- In high-temperature applications, the limits specified for each version must be respected and preliminary tests must be carried out under real conditions of use.
Reel splicing on siliconized surfaces using PET tape with silicone
Javier contacted the ATyT team because he needed to make reel splices on siliconized surfaces. The solution used until then did not provide the necessary adhesion on this type of surface, which made it difficult to maintain a stable splice during the process.
After analyzing the application, our technical department recommended the PET tape with silicone. Its silicone adhesive provides an excellent level of adhesion, especially on siliconized surfaces, and the PET backing offers thermal and chemical resistance while remaining flexible.
We sent him a sample to carry out different tests directly on the material used in production. During the trials, they confirmed that the tape made splicing easy and provided good bonding on the non-stick surface.
The results were satisfactory, and they now use the PET adhesive tape with silicone for reel splicing, achieving a solution adapted to the needs of their production process.
Frequently asked questions
It is a polyester adhesive tape made of a PET film coated with a pressure-sensitive, high-temperature-resistant silicone adhesive.
Yes. One of its main advantages is its thermal resistance. The tape is designed to withstand 1-hour cycles at temperatures of up to 220 °C.
Yes. One of its main applications is high-temperature masking, including parts subjected to powder coating processes.
Yes. The silicone adhesive provides an excellent level of adhesion, especially on siliconized surfaces. For this reason, it can also be used for splicing on non-stick materials such as siliconized paper.
The technical data sheet highlights that the tape leaves no adhesive residue on the surfaces where it is applied, a particularly useful feature in protection and masking operations.
Yes. It has good insulating properties and is suitable for applications that require insulation and resistance to high temperatures, such as motors, transformers or coils.
Yes. Its recommended applications include holding parts or vacuum bags during composite bonding operations, where thermal resistance and suitable temporary fixing may be required.
The surface must be clean, dry and free of grease and oil. During placement, sufficient pressure must be applied to promote contact between the adhesive and the surface and achieve the intended properties.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.