- All products
- Single sided tapes
- PVC
- Fire-retardant PVC electrical tape
- PVC
Flame-Retardant PVC Insulating Tape for Electrical Use
LATyT’s flame-retardant PVC insulating tape for electrical use is designed to provide electrical insulation and protection for cables, connections and splices in low-voltage installations. Made with a flexible polyvinyl chloride (PVC) backing and a pressure-sensitive natural rubber adhesive, it offers good adhesion, conformability and strength for professional applications.
This electrical insulating tape combines the dielectric properties of PVC with flame-retardant, self-extinguishing behavior, helping to limit flame spread under the relevant test conditions. These characteristics make it a suitable solution for electrical installations, maintenance work and industrial applications that require insulation and protection of wiring.
Thanks to its flexible backing, the insulating adhesive tape easily adapts to different diameters and geometries, allowing cables, connections and splices to be wrapped evenly. Its conformability makes application easier even in hard-to-reach areas, providing continuous coverage when installed correctly.
As a tape for electrical cables, it is especially useful for protecting conductors, bundling wiring and organizing connections inside electrical panels and industrial equipment. Its availability in different colors also makes it easier to visually identify groups of conductors, in line with the codes established by the applicable standards.
The insulating tape for electrical splices provides a practical solution for protecting conductor joints that require additional insulation. Its natural rubber adhesive ensures good bonding to the backing, while the flexibility of the PVC makes it easier to cover connection areas.
One of its main features is its behavior as a self-extinguishing insulating tape. Its flame-retardant formulation is intended to hinder flame spread, offering an additional benefit for electrical applications where it is important to select materials with suitable fire-related properties.
This low-voltage insulating tape has a dielectric strength of 40 kV/mm and a service temperature range of −10 °C to +80 °C. These properties allow it to be used in a variety of electrical installation, repair and maintenance applications, always in accordance with the technical requirements of each installation.
In addition to conventional electrical installations, this professional insulating tape can be used in automotive applications, electrical and electronic equipment, household appliances and industrial processes that require wiring protection and organization.
ATyT’s flame-retardant tape is available in different colors and thicknesses, making it possible to adapt the product to the needs of each application. Its combination of flexibility, adhesion and insulating properties makes it easy to incorporate into everyday installation and maintenance work.
Thanks to these characteristics, PVC insulating tape is a versatile solution for professionals looking for a flexible electrical insulation tape with good dielectric properties and flame-retardant behavior for protecting cables and connections.
ADHESIVE PROPERTIES | VALUES |
| Total thickness | 0.13 mm |
| Tensile strength | 25 N/cm |
| Adhesion to steel | 180 % |
| Dielectric strength | 1,8 N/cm |
| Service temperature range | [-10ºC - + 80ºC] |
| Flammability rating | Self-extinguishing |
Advantages That Make the Difference
- Electrical insulation: offers a dielectric strength of 40 kV/mm, providing suitable insulating properties for low-voltage electrical applications.
- Flame-retardant behavior: its self-extinguishing formulation helps limit flame spread under the relevant test conditions.
- Flexibility and conformability: the PVC backing allows cables, connections and splices to be wrapped, adapting to different diameters and geometries.
- Good adhesion and strength: its natural rubber adhesive provides suitable bonding, while the backing offers mechanical strength and elongation.
- Available in different colors: makes it easier to organize and visually identify wiring during installation and maintenance work.
Application Conditions
To ensure proper performance of the flame-retardant PVC insulating tape for electrical use:
- Apply to clean, dry surfaces free of dust, grease and oil.
- Carry out electrical work with the installation de-energized and following the relevant safety procedures.
- Wrap the cable or connection evenly, ensuring sufficient overlap between turns.
- Apply moderate tension while taping, avoiding excessive stretching that could reduce the thickness of the material.
- Check that the tape fully covers the area requiring insulation.
- Select the number of layers and the thickness according to insulation needs and the applicable standards.
- Avoid applying it to damaged or incompatible surfaces without a prior test.

Success Story: PVC Insulating Tape for Electrical Use
Marc, a maintenance technician at an industrial company, needed to improve the organization and identification of electrical conductors inside distribution panels. He was looking for a flexible, durable solution that would allow him to bundle the wiring, make maintenance work easier and provide electrical insulation properties.
After analyzing the application, ATyT recommended the flame-retardant PVC insulating tape for electrical use, made with a flexible PVC backing and a natural rubber adhesive. Its good conformability and adhesion allow it to adapt to different cable diameters and bundles.
During installation, Marc used the red electrical insulating tape to bundle and identify certain sets of conductors inside the electrical panel. Its flexibility made for an even application around the wiring, while its dielectric properties and self-extinguishing behavior provided suitable performance for this environment.
Thanks to this solution, Marc was able to improve the visual organization of the wiring and make it easier to identify the different groups of conductors during maintenance operations, incorporating the flame-retardant PVC insulating tape into his regular electrical installation and maintenance work.
Frequently Asked Questions
Flame-retardant PVC insulating tape is designed for electrical insulation, splice protection and conductor bundling. It is used in low-voltage electrical installations, electrical panels, maintenance work and industrial applications where a flexible tape with insulating properties is required.
It means the electrical insulating tape is formulated to hinder flame spread and stop burning once the ignition source is removed, according to the relevant test conditions. This feature provides additional protection, although it does not make the tape a completely non-combustible material.
Yes. PVC insulating tape can be used to bundle, organize and identify sets of conductors inside industrial electrical panels. Its flexibility allows it to adapt to different wiring diameters, making installation and maintenance tasks easier. It does not replace the fastening systems required by the installation.
The tape has a dielectric strength of 40 kV/mm, according to ATyT’s technical data sheet. This property indicates its insulating capacity against electrical voltage under test conditions. Suitability for a specific installation also depends on the thickness applied, the conditions of use and the corresponding electrical requirements.
PVC insulating tape for electrical use has a service temperature range of −10 °C to +80 °C. This allows it to be used in different electrical installation and maintenance environments, provided the recommended working conditions are respected.
Yes. ATyT offers PVC insulating tape in different colors, making it possible to visually organize wiring and identify certain groups of conductors during installation and maintenance work. The choice of color must respect the identification codes established by the applicable standards.
The PVC backing provides flexibility, conformability and electrical insulation properties. Combined with its natural rubber adhesive, it enables even application around cables, splices and connections, even in areas with irregular geometries.
Flame-retardant electrical insulating tape is used in industrial electrical installations, electrical panel maintenance, automotive, electrical and electronic equipment and household appliances. It is especially useful in applications that require conductor insulation, splice protection and wiring organization.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.