- All products
- Single sided tapes
- PVC
- Perforated PVC tape for joints
- PVC
Perforated PVC tape for joints
ATyT's perforated PVC tape for joints is a technical solution designed to reinforce, protect and repair the joints, corners and edges of plasterboard. Made with a high-density PVC backing, laminated on the reverse with a flexible paper film, it offers mechanical strength, stability and easy adaptation to different surfaces in construction and renovation work.
Thanks to its composition, this PVC joint tape combines the strength of the plastic material with the flexibility needed to adapt to different junctions between surfaces. Its perforated structure makes it easier to integrate with joint treatment compounds, helping to achieve uniform, long-lasting finishes.
Especially suitable as a plasterboard joint tape, it reinforces the areas where boards meet and protects points that are particularly exposed to wear. Its resistance to abrasion and impact makes it a suitable solution for drywall partitioning, interior cladding and refurbishment work.
One of its main applications is as a corner reinforcement tape, where it provides extra protection against knocks, scuffs and mechanical stress. Its high-density PVC backing helps maintain the integrity of wall junctions and makes it easier to achieve sharp finishes.
Plasterboard corner repair tape is also suitable for refurbishment work and the maintenance of damaged surfaces. It reinforces damaged areas and restores the continuity of edges when incorporated into the corresponding repair and finishing system.
In applications on plasterboard, this tape for plasterboard edges helps protect the most vulnerable areas of the panels, especially corners, junctions and points exposed to frequent contact. Its mechanical strength improves the protection of these surfaces during normal use.
Thanks to its resistance to water and moisture, it can be used as a joint tape in damp areas, provided it is used with compatible compounds and within a suitable building system. This characteristic makes it suitable for use in certain indoor spaces where ambient humidity can vary.
As a crack repair tape, it can be used to reinforce small cracks and repaired areas on compatible surfaces. Its strong structure provides localised reinforcement and helps reduce the reappearance of surface cracks once the underlying causes have been corrected.
In installation and finishing work, this reference may also appear in searches related to self-adhesive joint tape. However, it must be fitted following the application system indicated for the product and using the appropriate fixing materials or compatible compounds.
Thanks to these characteristics, ATyT's perforated PVC tape for joints is a practical solution for plasterboard installers, construction professionals and renovation companies looking to reinforce corners, repair damaged edges and achieve durable finishes in new-build and refurbishment projects.
ADHESIVE PROPERTIES | VALUES |
Total thickness | 800 μm |
Tensile strength | > 400 N/cm |
Service temperature range | [-20ºC - +70ºC] |
Advantages that make the difference
- Water and ageing resistance: its PVC backing allows it to be used in applications exposed to moisture and different environmental conditions, both indoors and outdoors.
- High flexibility and adaptation to surfaces: its flexible structure makes it easy to fit on corners, edges and junctions between materials, adapting to different geometries.
- Mechanical and abrasion resistance: it offers a tensile strength of over 400 N/cm and performs well against wear, impact and certain chemical agents.
- Easy to cut and apply: it allows the required lengths to be prepared for each repair, making installation and maintenance work easier.
Application conditions
To ensure optimal performance of the perforated PVC tape for joints:
- The surface must be clean, dry and free of dust, grease, oil or any substance that could hinder fixing.
- Check beforehand that the product is compatible with the substrate and the installation materials.
- Cut the tape to the required length for the area to be reinforced or repaired.
- Place the tape evenly over the joint, corner or edge, avoiding folds and deformations.
- Use the fixing system suited to the version supplied.
- On the self-adhesive version, apply enough pressure to ensure the adhesive makes contact with the surface.
- Avoid excessive tension during fitting, which could cause lifting or deformation.
- Check that service conditions are within the range of −20 °C to +70 °C.
Repairing plasterboard corners with perforated PVC tape
Marc, an installer specialising in plasterboard, needed to repair several damaged corners during the refurbishment of an office. Continuous use of the premises had caused knocks, small cracks and damage to the edges of the walls, making it difficult to achieve a uniform, hard-wearing finish.
After analysing the needs of the application, ATyT recommended the perforated PVC tape for joints, made with a high-density PVC backing and a flexible paper film laminated on the reverse. Its resistance to impact, abrasion and moisture made it a suitable solution for reinforcing the damaged areas.
During installation, Marc used the plasterboard corner repair tape on the damaged edges, adapting it to the surfaces and fixing it with compatible finishing materials. Its perforated structure made it easier to integrate with the repair compound and made it possible to achieve a uniform surface.
Thanks to this solution, Marc was able to restore the damaged corners, reinforce the areas most exposed to wear and improve the durability of the finishes, with a clean, long-lasting result.
Frequently asked questions
Perforated PVC tape for joints is used to reinforce, protect and repair corners, edges and joints in plasterboard. Its high-density PVC backing offers mechanical strength and flexibility, making it easier to repair damaged surfaces and achieve hard-wearing finishes.
PVC joint tape has a high-density plastic backing that provides resistance to impact, abrasion and moisture. Compared with conventional paper tapes, it is particularly useful for reinforcing corners and edges exposed to knocks and wear. The choice depends on the type of joint and the finishing system used.
Yes. Plasterboard corner repair tape is designed to reinforce damaged edges and restore the continuity of corners. Its flexible structure allows it to be adapted to different junctions between surfaces, while its mechanical strength helps protect the repaired areas.
Yes. Joint tape for damp areas is resistant to water and ageing, so it can be used in certain applications exposed to ambient humidity. However, it must be installed with compatible materials and does not replace waterproofing systems where these are required.
The standard reference should not be considered self-adhesive. ATyT can supply a self-adhesive joint tape by adding an acrylic adhesive, on request. The version and the fixing system must be confirmed before installation.
Yes. As a crack repair tape, it can be used to reinforce small surface cracks and localised repairs on plasterboard and other compatible surfaces. Before applying it, it is important to identify and correct the cause of the crack to reduce the risk of it reappearing.
ATyT's corner reinforcement tape has a thickness of 800 µm and a tensile strength of over 400 N/cm. These characteristics allow it to be used in applications requiring extra protection against mechanical stress, knocks and abrasion.
To apply plasterboard joint tape, the surface must be clean, dry and free of dust or grease. Cut the tape to the required size, place it evenly over the area to be reinforced and use the fixing system or compound compatible with the version supplied. It is important to avoid folds and deformations.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.