- All products
- Single sided tapes
- Aluminium
- Microperforated aluminium anti-drip adhesive tape
- Aluminium
Microperforated Anti-Drip Aluminum Adhesive Tape
ATyT’s microperforated anti-drip aluminum adhesive tape is designed for technical applications where adequate ventilation is required on multiwall polycarbonate panels without giving up protection against dust and particles. Available in two versions, large microperforated anti-drip and small microperforated anti-drip, it allows you to select the most suitable format for the needs of each application.
Made with an aluminum backing laminated with PET, closed with PET nonwoven, and a solvent-based acrylic adhesive, this anti-drip aluminum tape offers reliable adhesion and high stability in industrial and construction applications, and is also an effective solution as an aluminum sealing tape in technical environments.
The anti-drip aluminum tape, in both its large and small microperforated versions, is used to close and ventilate the edges of multiwall panels, allowing accumulated vapor to escape from inside and helping to keep them transparent over time. Thanks to its technical structure, the microperforated aluminum tape promotes panel ventilation and acts as a barrier against dust, contaminants and external particles, making it a solution especially suited as a polycarbonate tape.
The microperforated PET aluminum tape is especially suited to applications that require high heat resistance and good mechanical performance. For this reason, the panel ventilation tape is used both on multiwall panels and in technical applications related to refrigerators, freezers and the assembly of hot air blowers in dryers.
Thanks to its high-cohesion solvent-based acrylic adhesive, the microperforated anti-drip aluminum adhesive tape offers excellent adhesion and aging resistance. Both versions provide ventilation over the edges of the cellular structure, helping to prevent dust build-up and to reduce the conditions that favor the growth of fungi and algae inside the panels.
LThe adhesive solutions developed by ATyT are geared toward delivering durability, industrial performance and compatibility with technical construction, refrigeration and industrial supply applications. The availability of large and small anti-drip versions widens the selection options to adapt to the specific needs of each project.
ADHESIVE PROPERTIES | VALUES |
Weight | 40 g/m2 |
Thickness | 0,16 mm |
Tensile strength | 110 N/5 mm (MD) - 95 N/5 mm (CD) |
Elongation at brea | 20-25 % |
Permeability level | 3200 l/(m2·s) |
Advantages That Make the Difference
- Excellent level of adhesion and aging resistance
- Greater ventilation for multiwall panel edges
- High thermal conductivity
- Excellent mechanical strength and easy handling
- Helps keep panels clean and transparent
Application Conditions
To ensure optimal tape performance:
- The surface must be clean, dry and free of grease or oil
- Uniform pressure must be applied during bonding
- Insufficient pressure may affect the mechanical properties and the final appearance

Protection and Ventilation of Multiwall Polycarbonate Panels
Marc, installation manager at a company specializing in polycarbonate enclosures and roofing, contacted the ATyT team because he needed a solution to protect the ends of multiwall panels without completely blocking their ventilation. He wanted to prevent dust and dirt from getting in, while still allowing the vapor generated inside the panel to escape.
After analyzing the application, ATyT recommended our microperforated anti-drip aluminum adhesive tape, especially suited for the edge sealing and ventilation of multiwall polycarbonate panels. Thanks to its microperforated structure and PET nonwoven, the tape allows vapor to pass through and provides a barrier against dust particles, helping to keep the panels clean and transparent.
The results were very satisfactory. The tape protected the panel edges while maintaining adequate ventilation and preventing dirt from easily entering the panel. They now use it routinely on polycarbonate installations where they need to combine protection, ventilation and breathability.
Frequently Asked Questions
It is mainly used for applications where protection and ventilation need to be combined, especially on the edges of multiwall polycarbonate panels and in certain industrial applications with thermal requirements.
The microperforation allows the vapor generated on the application surfaces to pass through and provides a controlled level of ventilation, preventing the panel from being completely sealed.
Yes. Its composition is designed to allow vapor to pass through while acting as a barrier against dust particles, helping to keep the inside of the panels cleaner.
Yes. The technical data sheet specifically states its use on the edges and for the ventilation of honeycomb PC or multiwall polycarbonate panels.
Yes. One of its main advantages is that it provides the right amount of ventilation over the edges of the cellular structure, helping to balance moisture and air inside the panel.
The tape uses a solvent-based acrylic adhesive, applied on a PET-laminated aluminum structure and closed with PET nonwoven.
Yes. The technical data sheet states that it is especially recommended for applications requiring high heat resistance, such as certain refrigeration systems, freezers or the assembly of hot air blowers.
Its main difference is the combination of microperforation, breathability and a barrier against dust. It also offers good adhesion, aging resistance, high thermal conductivity and good mechanical properties.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.