- All products
- Single sided tapes
- Antislips
- Thermoplastic Adhesive Anti-Slip Tape for Indoor and Outdoor Use
- Antislips
Thermoplastic Anti-Slip Adhesive Tape for Indoor and Outdoor Use
ATyT’s thermoplastic anti-slip adhesive tape for indoor and outdoor use is designed to improve grip and reduce the risk of slips on walking surfaces, in both indoor and outdoor installations. Made from preformed alkyd-type thermoplastic paint, this indoor and outdoor anti-slip tape provides a durable, waterproof, high-friction finish, especially suited to stairs, access points, pavements and traffic areas subject to demanding conditions.
Unlike a conventional anti-slip adhesive tape, which uses a pressure-sensitive adhesive, this product comes as a heat-fusible strip and is fixed to the surface by applying heat. Its thermoplastic composition creates a firm bond with the substrate, forming a low-profile anti-slip surface that helps reduce the risk of tripping and blends easily into different pavements.
The anti-slip tape for asphalt is especially suited to improving safety at access points, walkways and bituminous surfaces. It is installed by heating with propane equipment, which melts the thermoplastic material and makes it bond to the pavement. Once cooled, the strip provides a water-resistant finish suitable for marking and protecting exterior surfaces.
Likewise, the anti-slip tape for concrete can be used on stairs, ramps, entrances and other traffic surfaces. To ensure proper fixing on concrete and on materials other than asphalt, a primer compatible with thermoplastic materials must be applied beforehand, making sure the surface is completely dry before installing the strip.
Thanks to its resistance to UV rays and to certain chemicals, this outdoor anti-slip strip is designed to withstand the usual conditions of open-air applications. Its composition and finish make it suitable for projects where mechanical strength, durability and protection against slipping must be combined.
The anti-slip tape for stairs is especially useful for marking the edges of steps, improving grip and making traffic areas easier to identify. It can also be used as an anti-slip tape for floors in industrial areas, access points, machinery zones and other spaces where a higher-friction surface is required.
In addition to its anti-slip function, the thermoplastic strip can be used for sealing joints and repairing cracks up to 5 mm wide in asphalt membrane, helping to limit water ingress and providing a waterproof finish.
This high-strength anti-slip tape is available in three colors: yellow, black and white, allowing you to select the most suitable finish for each application. The different colors make it easy to integrate into pavements and allow the product to be used as an anti-slip marking tape to highlight steps, access points and traffic areas.
At ATyT we offer thermoplastic anti-slip adhesive tape for indoor and outdoor use in roll format, with presentation and customization options adapted to the needs of distributors, installers, maintenance companies and construction professionals. Its heat application, environmental resistance and anti-slip finish make it a practical solution for improving safety conditions on different types of pavement.
ADHESIVE PROPERTIES | VALUES |
Specific gravity | 1,95 - 2,1 g/cm³ |
Total thickness | 2,6 ± 0,3 mm |
Anti-slip rating (SRT) | S3 (>55 SRT) |
Melting point | ≥ 88ºC |
% Volatile by volume | Negligible |
Water solubility | Negligible |
Application temperature range | [+180ºC ± 220ºC] |
Advantages That Make the Difference
- High slip resistance, thanks to its thermoplastic composition and high-friction finish, which help improve grip on stairs, floors, ramps and walkways.
- Suitable for indoor and outdoor applications, with good resistance to UV rays, water and certain chemicals, providing a durable finish in demanding environmental conditions.
- Heat application and strong fixing, using propane equipment that melts the thermoplastic material and helps it bond to compatible surfaces such as asphalt and properly prepared concrete.
- Waterproof, low-profile finish, which helps reduce the risk of tripping and allows the strip to be used both to improve grip and for certain sealing and crack-repair applications.
- Available in yellow, black and white, allowing anti-slip marking to be adapted to different pavements, access points and traffic areas, with quick return to service once the material has cooled.
Application Conditions
To ensure optimal tape performance:
- The application surface must be clean, completely dry and free of dust, grease, oil or any substance that could impair fixing.
- The strip must be installed by applying heat using suitable propane equipment, following the recommended installation procedure.
- The application temperature stated in the technical data sheet is between 180 °C and 220 °C, corresponding to the heating needed to install the thermoplastic material.
- On surfaces other than asphalt, such as concrete, a primer compatible with thermoplastic materials must be applied beforehand and the area allowed to dry completely.
- It is recommended to check the strip’s compatibility with the substrate beforehand, especially on materials such as metal, wood, marble or heat-sensitive surfaces.
- After application, the material must be allowed to cool before the surface is put back into service.
- Incorrect preparation or insufficient heat application may affect the fixing, the properties and the final finish of the product.
Improving Safety on Industrial Stairs with Thermoplastic Anti-Slip Tape
A company dedicated to the maintenance of industrial facilities needed to improve the safety of some exterior stairs and access areas used daily by workers. The main problem was the loss of grip on concrete and asphalt surfaces, especially in rain or damp conditions, which increased the risk of slips.
For this application, it was proposed to use ATyT’s thermoplastic anti-slip tape, a strip of preformed alkyd-type thermoplastic paint that provides a high-friction surface and a waterproof finish resistant to outdoor conditions.
The installation involved preparing the surfaces, removing dust, grease and moisture. On the concrete steps, a compatible primer would be applied beforehand, while the strip would be fixed using heat with propane equipment. The yellow version was proposed to improve the visual identification of the steps and reinforce the marking of walkways.
This solution would combine greater slip resistance with clearer visual marking, helping to improve safety conditions on industrial stairs and access points through a durable, long-lasting application.
Frequently Asked Questions
Thermoplastic anti-slip tape is a strip made from preformed alkyd-type thermoplastic paint, designed to improve grip on pavements and reduce the risk of slips. It is mainly used on stairs, ramps, access points, industrial floors and asphalt or concrete surfaces. Its heat installation gives a durable, waterproof finish suitable for indoor and outdoor applications.
Conventional anti-slip adhesive tape usually has a pressure-sensitive adhesive that allows it to be fixed directly to the surface. ATyT’s thermoplastic anti-slip tape, on the other hand, comes as a heat-fusible strip that has to be heated with propane equipment to bond to the pavement. This system creates an anti-slip layer integrated into the surface once the material cools.
Yes. The indoor and outdoor anti-slip tape is designed for applications on walking surfaces exposed to different environmental conditions. Its composition has good resistance to water, UV rays and certain chemicals, so it is suitable for stairs, access points, pavements and traffic areas both indoors and outdoors, provided that the substrate and installation conditions are compatible.
The anti-slip tape for asphalt and concrete can be applied on different materials, such as asphalt, concrete, metal, marble, mortar and wood, according to the conditions stated in the technical data sheet. On surfaces other than asphalt, a primer compatible with thermoplastic materials must be used beforehand. The substrate’s resistance to the heat needed for installation must also be checked.
The high-strength anti-slip tape is installed by applying heat with suitable propane equipment. Before placement, the surface must be clean, dry and free of grease, oil or dust. When working on concrete or other substrates other than asphalt, a compatible primer must be applied beforehand. The technical data sheet states an application temperature of 180 °C to 220 °C. Once the material has melted and bonded, it must be left to cool before the surface is used again.
Yes. The outdoor anti-slip strip is formulated to provide a waterproof finish and has good resistance to UV rays and certain chemicals. These characteristics allow it to be used on exterior pavements and walkways exposed to demanding environmental conditions, provided the installation is carried out correctly.
ATyT’s anti-slip marking tape is available in yellow, black and white, allowing you to select the most suitable finish according to the characteristics of the pavement and marking needs. Its standard format is 35 mm wide and 5 meters long, with presentation and customization options for distributors and professional customers.
Yes. In addition to improving grip, thermoplastic anti-slip tape can be used to seal joints and repair cracks up to 5 mm wide in asphalt membrane, helping to limit water ingress. Its heat-fusible composition makes it possible to achieve a waterproof finish, provided the surface preparation and heat application conditions are respected.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.