- All products
- Double sided
- Transfers
- Double-sided transfer tape with a paper liner
- Transfers
Double-Sided Transfer Adhesive Tape
ATyT’s double-sided transfer adhesive tape is an industrial bonding solution made with a modified polyacrylate adhesive and protected by a silicone paper liner. Its high initial tack and excellent conformability make it possible to create strong bonds between different materials, especially in lamination, assembly and industrial converting processes.
Thanks to its composition with no intermediate carrier, this double-sided transfer tape provides a flexible adhesive layer that conforms to surfaces of different shapes and sizes. This adaptability is especially useful for working with curved profiles, flexible materials and components that require an even bond without adding an extra carrier.
The transfer adhesive tape stands out for its high bond strength, with a value of 21.5 N/25 mm on steel. These characteristics allow it to be used in industrial processes that require reliable fixing, in both manual applications and compatible automated production systems.
The transfer tape with paper liner features a silicone-coated protective layer that makes it easier to handle, cut and place the adhesive during converting processes. This liner is removed during application, allowing the adhesive layer to be transferred to the material to be bonded. For automatic processes subject to higher tension, ATyT also offers an alternative version with a polypropylene liner.
Especially suited as a transfer tape for lamination, it makes it possible to join different materials using a highly conformable adhesive layer. Its flexibility helps it conform to curved surfaces and complex geometries, making it easier to laminate foams, sheets and other compatible industrial materials.
The transfer tape for splicing is designed to create adhesive bonds between different surfaces, helping to maintain the continuity of materials during certain manufacturing and converting processes. Its high initial tack makes it easier to fix elements in place and allows splices to be made in applications that require a strong bond.
Thanks to its modified polyacrylate formulation, this adhesive tape for low surface energy substrates offers good adhesion on materials such as polyethylene (PE), polypropylene (PP), foams and EPDM. This widens its range of applications in industrial processes where conventional tapes can have difficulty bonding.
The transfer adhesive tape makes it possible to deposit a layer of adhesive on a surface without the need for a permanent fabric or plastic carrier. This construction makes it easier to bond lightweight, flexible materials and to integrate into manufacturing processes where the aim is to reduce the thickness added by the adhesive system.
In assembly applications, double-sided transfer tape is an alternative for fixing panels, graphic elements and display media. Its resistance to aging and to different environmental conditions allows it to be used in compatible industrial applications that require a stable adhesive bond.
The applicator transfer tape can be used with compatible manual and automatic dispensers, making adhesive placement easier and improving process repeatability. The liner should be selected to suit the equipment and working tensions, especially in automatic systems.
Thanks to these characteristics, ATyT’s double-sided transfer adhesive tape is a versatile solution for converting companies, industrial manufacturers and professionals who need to carry out laminations, splices and bonds on materials with different characteristics, combining flexibility, high adhesion and ease of application.
ADHESIVE PROPERTIES | VALUES |
Adhesive weight | 50 g/m2 |
Liner weight | 80 g/m2 |
Adhesion to steel | 21,5 N/25mm |
Static shear resistance | > 4 h |
Application temperature range | [+5ºC ~ +45ºC] |
Service temperature range | [+40ºC - +100ºC] |
Maximum service temperature | [+120ºC] |
Advantages That Make the Difference
- High initial tack: its modified polyacrylate adhesive provides an adhesion to steel of 21.5 N/25 mm, making it easier to bond different materials in assembly and industrial converting processes.
- Excellent flexibility and conformability: with no intermediate carrier, the adhesive layer conforms to curved profiles, uneven surfaces and materials of different shapes and sizes.
- Adhesion to low surface energy materials: performs well on materials such as PE, PP, foams and EPDM, widening the bonding possibilities in industrial applications.
- Aging and temperature resistance: has good resistance to aging and weather conditions, with a stated maximum service temperature of +120 °C.
- Compatible with manual and automatic dispensers: makes industrial application processes easier. For automatic equipment with higher working tensions, the alternative with a PP liner can be selected.
Application Conditions
To ensure optimal performance of the double-sided transfer adhesive tape:
- The surface must be clean, dry and free of dust, grease, oil or any substance that could hinder adhesion.
- Check beforehand that the adhesive is compatible with the materials to be bonded.
- Apply within the recommended temperature range, between +5 °C and +45 °C.
- Cut or dispense the tape to the dimensions needed for each application.
- Place the adhesive layer evenly on the first surface, avoiding creases, tension and distortion.
- Apply enough pressure to ensure proper contact between the adhesive and the substrate.
- Remove the silicone paper liner before completing the bond with the second material.
- In automatic processes, check that the liner is compatible with the speed and tension of the equipment. Where there is a risk of the paper tearing, consider the alternative with PP film.
Laminating Technical Foams with Double-Sided Transfer Adhesive Tape
A company specializing in the manufacture of industrial components needed to improve the lamination of technical foams for insulation and protection systems. The main challenge was to achieve a strong bond between flexible materials, including low surface energy surfaces, without increasing the thickness of the assembly.
After analyzing the application, ATyT recommended the double-sided transfer adhesive tape with modified polyacrylate adhesive and silicone paper liner. Its high initial tack and flexibility made it possible to adapt to different materials and geometries.
During production, operators used the transfer tape for lamination with a compatible dispenser, applying an even layer of adhesive onto the foams. They then removed the liner and joined the materials under pressure, taking advantage of its ability to adapt to surfaces such as PE, PP and EPDM, after checking compatibility.
The solution simplified the bonding process and reduced the thickness added by the adhesive. Thanks to these advantages, the company adopted the double-sided transfer tape as an alternative for future lamination and industrial assembly projects.
Frequently Asked Questions
Double-sided transfer adhesive tape is a layer of adhesive with no intermediate carrier, protected by a liner that is removed during application. It allows two surfaces to be joined by a flexible adhesive film, without incorporating a permanent plastic or fabric carrier.
The main difference is its construction. Double-sided transfer tape has no intermediate carrier, while many conventional double-sided tapes use PET, paper, fabric or foam carriers. This allows the transfer tape to offer greater conformability and reduce the thickness added to the bond.
The transfer tape with paper liner features a silicone-coated protective layer that makes it easier to handle, cut and apply. During installation, the liner is removed to allow the adhesive layer to contact the second surface. In automatic processes subject to higher tensions, an alternative version with a PP liner may be considered.
Yes. The transfer tape for lamination is suited to joining foams, sheets and other compatible flexible materials. Its construction with no intermediate carrier makes it easier to conform to curved surfaces and complex geometries, providing an even adhesive layer.
Yes. This adhesive tape for low surface energy substrates features a modified polyacrylate adhesive that offers good adhesion on materials such as polyethylene (PE), polypropylene (PP), foams and EPDM. Preliminary tests are recommended to verify compatibility and bond strength.
Yes. The transfer tape for splicing makes it possible to join materials during certain manufacturing and industrial converting processes. Its high initial tack makes it easier to fix surfaces together, although it is important to check that the bond withstands the tensions and working conditions of each process.
ATyT’s transfer adhesive tape has an adhesion to steel of 21.5 N/25 mm, according to the AFERA 5001 method. This value indicates its performance on steel under specific test conditions and may vary depending on the material, surface preparation and application conditions.
Yes. The applicator transfer tape can be used with compatible manual dispensers and automatic equipment. For automatic applications with higher working tensions, ATyT offers an alternative version with a polypropylene liner that helps reduce the risk of the liner tearing.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.