- All products
- Double sided
- Reinforced double-sided transfer tape
- Double sided
Reinforced Double-Sided Transfer Tape
ATyT’s double-sided transfer tape is an adhesive solution developed for lamination, fixing and bonding applications where high adhesive capacity combined with internal reinforcement is required. It consists of a modified polyacrylate adhesive reinforced with a polyester (PET) textile mesh, which helps strengthen and secure the bond between different materials.
Thanks to this structure, it combines the conformability typical of a transfer solution with the stability provided by the reinforcement. The mesh has a density of 4 × 1 threads/cm, a feature especially suited to bonding and splicing applications where the adhesive assembly needs to be reinforced.
This transfer adhesive tape is available in different adhesive thicknesses: 50 µm, 80 µm, 100 µm, 150 µm and 200 µm, making it possible to select the most suitable configuration according to the materials to be bonded and the demands of each application. This range allows the amount of adhesive to be matched to the characteristics of the surface and the type of bond required.
Its configuration as a double-sided tape with mesh provides additional reinforcement compared to a transfer solution without an internal structure. The transfer tape with polyester mesh is particularly interesting for processes where the tape’s conformability must be maintained while also having a structure that helps reinforce the bond.
The range can be supplied with two types of liner, allowing the product to be adapted to both the application system and the production process. The transfer tape with paper liner is available with a yellow or brown liner and is a suitable solution for conventional applications where the liner can be removed during assembly or lamination.
On the other hand, the transfer tape with plastic liner features a white polypropylene (PP) film. This configuration is especially interesting as a tape for automatic applications, since the PP film offers greater resistance to liner tearing caused by tension during this type of process. This functional difference is specifically covered in the product’s technical data sheet.
The combination of the modified polyacrylate adhesive and the internal reinforcement makes the product a reinforced adhesive tape capable of adapting to a wide variety of surfaces. It also offers high initial tack on different low-surface-energy substrates and good performance against aging, weather conditions and temperature.
Its structure also makes it suitable as a splicing tape, especially when the bond needs to be reinforced and secured. It can also be used in adhesive lamination processes and in bonding panels and display media that require high adhesion and resistance to high temperatures.
ADHESIVE PROPERTIES | VALORES 50 | VALORES 80 | VALORES 100 | VALORES 150 | VALORES 200 |
Adhesive weight | 50 g/m2 | 80 g/m2 | 100 g/m2 | 150,6 g/m² | 200 g/m2 |
Backing thickness | 50 µm | 80 µm | 100 µm | 150 µm | 200 µm |
Total thickness | 120 µm | 150 µm | 100 ± 5 µm | 150 µm | 260 µm |
Adhesion to steel | 19,2 N/25mm | 25,5 N/25mm | ≥ 24 N/25 mm | 26,07 N/25 mm | 31,5 N/25mm |
Static shear resistance | > 1 h | > 1,5 h | ≥ 2 h | ≥ 2,5 h | > 3 h |
Application temperature range | [+5ºC ~ +45ºC] | [+5ºC ~ +45ºC] | [+5ºC ~ +45ºC] | [+5ºC ~ +45ºC] | [+5ºC ~ +45ºC] |
Service temperature range | [+40ºC - +100ºC] | [+40ºC - +100ºC] | [+40ºC - +100ºC] | [+40ºC - +100ºC] | [+40ºC - +100ºC] |
Maximum service temperature | [+120ºC] | [+120ºC] | [+120ºC] | [+120ºC] | [+120ºC] |
Advantages That Make the Difference
- PET mesh reinforcement: incorporates a 4 × 1 threads/cm polyester textile mesh that helps reinforce bonding and splicing applications.
- Five thicknesses available: 50, 80, 100, 150 and 200 µm versions to adapt the solution to different application needs.
- Two liner types: choice of yellow or brown silicone paper, or white PP film, depending on the application process.
- Suitable for automation: the PP liner offers greater resistance to tearing caused by tension during automatic processes.
- High conformability: adapts to a wide variety of surfaces and makes it easier to laminate different materials.
- Temperature and aging resistance: offers good performance against weather conditions and a wide service temperature range.
Application Conditions
To ensure optimal tape performance:
- Apply to clean, dry surfaces free of grease, oil, dust or other anti-adhesive substances.
- Apply uniform pressure during application to promote proper contact between the adhesive and the surface.
- Preferably use on smooth or slightly porous surfaces.
- Choose between 50, 80, 100, 150 or 200 µm depending on the materials, the surface characteristics and the bonding requirements.
- Choose the yellow or brown paper liner version for conventional applications, or the white PP film liner when the automatic process requires greater liner resistance to tension.
- Check beforehand that the product is suitable for the substrate and the specific application.

Laminación continua con cinta transfer de doble cara reforzada
María, production manager at a company specializing in the conversion of industrial materials, needed to improve an automatic process for laminating sheets and flexible materials. The adhesive solution previously used caused problems as the material moved through the laminator, since the tension generated between the different rollers could cause the liner to break. These incidents forced the machine to be stopped, the material to be readjusted and the process to be restarted, affecting production pace and continuity.
After analyzing how the line operated, we proposed using a reinforced double-sided transfer tape. This configuration made it possible to integrate the adhesive solution directly into the continuous lamination process, applying the adhesive layer evenly onto the material as it advanced through the machine’s rollers.
In addition, the modified polyacrylate adhesive offered the adhesion needed to work with different substrates, allowing the solution to be used in industrial processes that need to combine lamination, stability and adhesive capacity. The tape could thus be integrated into the production line without adding extra operations to the process.
After machine trials and adjusting the configuration to the needs of the application, María was able to incorporate the solution into the regular manufacturing process. The result was more continuous and stable lamination, with a lower risk of liner breakage and a solution better suited to the demands of an automated production process.
Frequently Asked Questions
The transfer tape with paper liner is available with a yellow or brown liner and is suitable for conventional assembly and lamination applications. The plastic liner version uses a white PP film, especially suited to automatic applications, as it offers greater resistance to tearing caused by tension during the process.
The transfer tape with polyester mesh incorporates a PET textile reinforcement with a density of 4 × 1 threads/cm. This structure helps strengthen and secure the bond, especially in splicing applications and other processes where a reinforced adhesive tape is required.
The reinforced double-sided transfer tape is available in 50, 80, 100, 150 and 200 µm, allowing you to select the most suitable amount of adhesive depending on the materials, surfaces and needs of each application.
Yes. For this type of process, the tape for automatic applications with white PP film liner is especially recommended, as this liner is designed to reduce the risk of tearing caused by tension during automatic application.
The transfer adhesive tape offers high adhesion on different surfaces and is especially suited to materials such as foams, PE, PP and EPDM. It can also be used on smooth or slightly porous surfaces.
Yes. Its internal PET mesh reinforcement means it can be used as a splicing tape in applications where the bond between materials needs to be reinforced and secured.
According to the technical data sheets provided, the application temperature range is +5 °C to +45 °C. The product also has a stated service temperature range of +40 °C to +100 °C and a maximum service temperature of +120 °C.
The surface must be clean, dry and free of grease, oil, dust or other anti-adhesive substances. It is also important to apply enough pressure during application to achieve proper contact between the adhesive and the substrate.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.