- All products
- Single sided tapes
- Aluminium
- Thermal insulation aluminium film without adhesive
- Aluminium
Aluminum Roll Without Adhesive
In construction, HVAC and industrial applications, it is common to need materials that improve thermal insulation and protect different surfaces against heat, moisture and water vapor.
ATyT’s aluminum roll without adhesive is available in two thicknesses: 40 µm and 50 µm, both made from 8011-O tempered alloy aluminum foil. These two versions make it possible to adapt the covering to the needs of each application, offering a flexible and durable solution for the thermal conditioning of surfaces in industrial and commercial installations.
The 40 µm aluminum roll is especially suited to applications that require a lightweight, flexible covering that is easy to handle. Its lower thickness makes it easier to conform to uneven surfaces, making it an attractive option for covering pipes, air conditioning ducts and surfaces with complex geometry.
The 50 µm aluminum roll, for its part, offers greater material thickness, making it an alternative for applications where a covering with more body is wanted. It is especially suited to covering ceilings, beams, walls, floors and surfaces in industrial installations, as well as to the thermal covering of ducts and other components.
Both versions have good resistance to water vapor and moisture, to aging and to most solvents. In addition, their high conformability allows them to be used as an aluminum covering on different surfaces, in both indoor and outdoor applications, with a service temperature range of −20 °C to +120 °C.
This insulation aluminum is commonly used in construction and HVAC, especially for covering pipes, ventilation ducts and surfaces of industrial and commercial buildings. Thanks to the reflective properties of aluminum, it can help reduce radiant heat transfer in summer and support heat retention in winter, provided it is properly integrated into the insulation system.
With its 40 and 50 µm versions, ATyT offers a range of aluminum rolls without adhesive for construction, HVAC and thermal insulation, making it possible to select the most suitable thickness according to the characteristics of the surface, handling needs and the conditions of each project.
ADHESIVE PROPERTIES | VALUES | VALUES
|
Alloy typen | 8011-O tempered | 8011-O tempered |
Backing thickness | 40 μm | 50 µm |
Tensile strength | 84 N/mm2 | 72 N/mm2 |
Elongation at break | 8 % | 9 % |
Yield strength | 32 N/cm | 34 N/cm |
Service temperature range | [-20ºC - +120ºC] | [-20ºC - +120ºC] |
Advantages That Make the Difference
- Good resistance to water vapor and moisture
- Good aging resistance indoors and outdoors
- Flame-retardant aluminum backing
- Excellent conformability on uneven surfaces
- High resistance to most solvents
Application Conditions
To ensure optimal roll performance:
- Use on clean, dry surfaces free of grease, oil and dust
- Fit the foil correctly to the geometry of the surface
- Select the right format for the application
- Check beforehand that the product is suitable for each use
- Store in its original packaging at 20 to 30 °C, protected from moisture and direct sunlight
Covering HVAC Ducts with Aluminum Roll Without Adhesive
Javier, maintenance manager at an industrial air conditioning company, contacted the ATyT team because he needed to improve the outer covering of the air conditioning ducts in several commercial installations. He was looking for a solution that would conform properly to the surfaces and provide protection against moisture and water vapor.
After analyzing the application, our technical department recommended ATyT’s aluminum roll without adhesive. Thanks to its good conformability, the foil could be fitted to the covering of pipes and ducts, while also offering good resistance to moisture, water vapor and aging.
The results were very satisfactory. The aluminum film made it possible to create a uniform covering adapted to the geometry of the ducts. They now use this solution routinely on duct insulation and HVAC projects, as well as in other thermal covering applications in industrial and commercial installations.
Frequently Asked Questions
It is mainly used for thermal conditioning and covering of surfaces in construction, HVAC and industrial and commercial installations.
It is mainly used for thermal conditioning and covering of surfaces in construction, HVAC and industrial and commercial installations.
Yes. It can be used to cover surfaces on ceilings, beams, floors and walls, among other applications.
Yes. ATyT can supply the aluminum roll without adhesive in different formats and sizes, adapting to the needs of each industrial application. Available widths and lengths can be requested according to each customer’s specific requirements.
Yes. Among its main advantages is its good resistance to water vapor and to the moisture present on surfaces.
Yes. Its excellent conformability makes it easy to fit the aluminum covering to a wide variety of uneven surfaces.
The technical data sheet states a service temperature range of -20 °C to +120 °C.
Because it combines good conformability, resistance to moisture and water vapor, resistance to aging and to most solvents, as well as having a flame-retardant backing.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.