- All products
- Approved adhesive tape for trucks and trailers
- All products
Approved Adhesive Tape for Trucks and Trailers
ATyT’s approved reflective tape is a high-visibility adhesive solution designed to improve the identification of industrial vehicles at night and in reduced lighting conditions. It is especially suited to contour marking of trucks, trailers and other transport vehicles, making their dimensions stand out when lit by the headlights of other drivers.
This reflective adhesive tape is made with a PMMA film backing and a permanent pressure-sensitive acrylic adhesive. Its structure provides high retroreflectivity, returning incident light back toward its source and making vehicles easier to see in low-visibility situations.
The reflective tape for trucks and trailers allows contour markings to be applied that help visually identify the sides and rear of vehicles. This application is especially important in professional transport, where the size of vehicles can make them harder to perceive when driving at night or in areas with limited lighting.
One of its main features is its UN ECE 104 Class C approval, which applies to retroreflective materials intended for vehicle marking. This classification identifies the product as an ECE 104 reflective tape designed for contour marking applications, in accordance with the conditions set out in the relevant regulation.
The grade 3 reflective tape has a total thickness of 500 µm and is available in three colors: white, yellow and red. This range makes it possible to select the right color according to the position of the marking, the type of vehicle and the applicable marking requirements.
Thanks to its high capacity to return light toward its source, this high-retroreflectivity reflective tape helps other drivers more easily recognize the presence, orientation and dimensions of a truck or trailer. Its reflective performance has been evaluated through specific measurements for all three colors, in accordance with the parameters set out in the technical data sheet.
In addition to its optical performance, the approved reflective adhesive tape has good resistance to weathering, corrosion, cleaning processes and fuels, in line with the approval tests stated in the technical documentation. These characteristics allow it to be used outdoors and in applications linked to professional transport.
The reflective tape for vehicle marking can also be used for the visual identification of certain exterior signage elements, posts and obstacles, provided the installation conditions and regulatory requirements are compatible with the characteristics of the product.
Its permanent acrylic adhesive offers high adhesion to steel, with values that vary slightly by color. This makes it easier to fix onto compatible surfaces that have been cleaned and prepared beforehand, allowing marking applications with a strong adhesive bond.
ATyT supplies this Class C reflective adhesive tape in rolls of different widths and offers customization and converting options on request. In this way, it provides a solution for industrial vehicle manufacturers, bodywork companies, workshops, distributors of transport accessories and professionals specializing in vehicle marking.
ADHESIVE PROPERTIES | VALUES |
Total thickness | 500 µm |
Adhesion to steel, white | 22,0 N/25mm |
Adhesion to steel, red | 20,8N/25mm |
Adhesion to steel, yellow | 21,4 N/25mm |
Application temperature range | [5ºC – 35ºC] |
Service temperature range | [-25ºC - +70ºC] |
Advantages That Make the Difference
- ECE 104 Class C approval: reflective material approved for vehicle marking applications, intended especially for contour marking of trucks and trailers, in accordance with the applicable installation requirements.
- High retroreflectivity and night visibility: its high capacity to return light toward its source makes vehicles easier to identify at night and in reduced lighting, helping their dimensions stand out.
- Permanent adhesion and outdoor resistance: features a permanent acrylic adhesive with high adhesion to steel. It also resists weathering, corrosion, cleaning and fuels, in line with the approval tests.
- Available in white, yellow and red: three colors that make it possible to adapt the marking to the different positions and marking requirements of the vehicle, with supply and customization options according to each customer’s needs.
Application Conditions
To ensure optimal tape performance:
- The surface must be clean, dry and free of dust, grease, oil or any other substance that could hinder adhesion.
- The recommended application temperature is between +5 °C and +35 °C.
- During installation, uniform pressure must be applied over the entire surface of the tape to ensure proper contact between the adhesive and the substrate. Insufficient pressure may affect the adhesive properties and the final appearance of the product.
- For contour marking applications on trucks and trailers, it is recommended to check beforehand that the adhesive is compatible with the bodywork finish and to follow the relevant installation instructions.
- The layout, color and position of the reflective strips must comply with the regulatory requirements that apply to the type of vehicle and the planned installation.
ECE 104 Approved Reflective Marking on Truck and Trailer Bodywork
A company specializing in the manufacture and maintenance of industrial bodywork needed to improve the night-time visibility of its trucks and trailers using approved reflective strips, especially on roads and loading areas with poor lighting.
For this application, ATyT proposed its grade 3 reflective adhesive tape, approved under UN ECE 104 Class C, made with a PMMA backing and a permanent acrylic adhesive. Its high retroreflectivity makes the outline and dimensions of vehicles stand out, making them easier for other drivers to identify.
The solution involves applying white, yellow and red reflective strips onto surfaces prepared beforehand, ensuring a strong bond and a uniform finish. In this way, the safety and visibility of industrial vehicles are improved, offering a practical, long-lasting solution for bodywork manufacturers, workshops and transport professionals.
Frequently Asked Questions
It is mainly used for contour marking of trucks, trailers and certain industrial vehicles. Its high retroreflectivity makes their dimensions easier to identify at night and in low-light conditions.
Class C is a classification of retroreflective materials intended for vehicle contour marking under UN ECE Regulation 104. The technical data sheet states that the product is approved under this classification.
It is available in white, yellow and red. The choice of color depends on the position of the marking, the type of vehicle and the requirements set by the applicable regulations.
Yes. It is designed for contour marking applications on trucks and trailers. It must be installed in compliance with the legal requirements for each vehicle category.
The tape has a total thickness of 500 µm and is made with a PMMA backing and a permanent pressure-sensitive acrylic adhesive.
The technical data sheet states resistance to weathering, corrosion, cleaning and fuels, in line with the approval tests. Its service temperature range is −25 °C to +70 °C.
Adhesion to steel varies by color: 22.0 N/25 mm for white, 20.8 N/25 mm for red and 21.4 N/25 mm for yellow, according to ASTM D-3330.
Yes. The standard presentation includes rolls 50 and 100 mm wide and 45.7 m long. ATyT also offers options for customizing the core, banding, shrink-wrapping and roll labeling on request.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.