- All products
- Single sided tapes
- PTFE (Teflon)
- PTFE-coated fabric tape with embossed PVC liner
- PTFE (Teflon)
PTFE-coated fabric adhesive tape
ATyT's PTFE-coated fabric tape is a technical adhesive solution designed for industrial applications that require high-temperature resistance, non-stick properties and component protection. It is made with a fibreglass fabric and PTFE backing laminated in a sandwich structure, coated with silicone adhesive and protected by an embossed PVC liner that makes it easier to handle and apply.
Thanks to its composition, this Teflon tape has a smooth, low surface energy surface that provides excellent release properties and a low coefficient of friction. These characteristics reduce the adhesion of materials to the contact surface, making sealing, packaging and industrial machinery maintenance processes easier.
PTFE tape stands out for its performance at high temperatures and its resistance to various external agents and chemicals. It can withstand thermal cycles of up to 300 °C for 30 minutes and temperatures of up to 260 °C for periods of 8 hours, according to the tests stated in its technical data sheet.
Its laminated fabric backing makes this product a fibreglass and Teflon tape that combines mechanical strength, flexibility and non-stick properties. The reinforced structure provides a tensile strength of 170 N/cm, making it suitable for industrial applications where the material is subject to handling and mechanical stress.
Particularly suitable as a Teflon tape for heat sealers, it protects the contact areas of sealing equipment and creates a separating surface between the processed materials and the machine components. Its thermal and non-stick performance supports the operation of the equipment during heat-sealing cycles.
In the packaging sector, this tape for vacuum packaging machines is used as an insulating and protective element in industrial equipment. Its PTFE surface helps separate materials during packaging processes, while the reinforced backing helps protect the machinery components.
Teflon tape with silicone adhesive incorporates a pressure-sensitive adhesive that provides an adhesion to steel of 3 N/cm. Its formulation is designed to offer a balance between adhesion, heat resistance and ease of removal, reducing the possibility of leaving adhesive residue or causing oozing at the edges.
As a high-temperature tape, it is suitable for insulation, lining and protection of components subject to demanding thermal cycles. It can also be used to wrap rollers, protect wiring and reduce squeaking caused by contact between certain mechanical parts.
The embossed PVC liner is a distinguishing feature of this PTFE-coated fabric adhesive tape. Its function is to protect the adhesive surface before installation and make the material easier to handle, especially during cutting, preparation and placement on industrial components.
Available in thicknesses of 130, 180 and 250 µm, ATyT's range of PTFE-coated fabric tapes can be adapted to different application needs. Thanks to ATyT's converting and customisation capabilities, the product can be supplied in different widths, lengths and formats for integration into industrial processes.
ADHESIVE PROPERTIES | VALUES |
Total thickness | 130 μm |
Tensile strength | 170 N/cm |
Elongation at break | 15 % |
Adhesion to steel | 3 N/cm |
Rolling Tack Ball | ≤ 10 cm |
Application temperature range | [-10ºC - + 45ºC] |
Maximum service temperature (short term) | 300 ºC |
Maximum service temperature (long term) | 260 º |
Advantages that make the difference
- Excellent non-stick properties: the PTFE surface has low surface energy and a low coefficient of friction, making materials easy to release and preventing unwanted adhesion during industrial processes.
- High-temperature resistance: withstands thermal cycles of up to 300 °C for 30 minutes and 260 °C for 8 hours, providing protection in heat-sealing applications and packaging machinery.
- High-performance silicone adhesive: provides good adhesion and balanced performance under thermal demands, allowing easy application and removal with less risk of residue or oozing at the edges.
- Embossed PVC liner for easier application: protects the adhesive during storage and handling, allowing the tape to be prepared, cut and positioned more conveniently and precisely.
- Mechanical and chemical resistance: its reinforced fibreglass and PTFE backing combines tensile strength, flexibility and good resistance to external agents and chemicals.
Application conditions
To ensure optimum performance of the PTFE-coated fabric adhesive tape:
- The surface must be clean, dry and free of dust, grease, oil or any substance that could hinder adhesion.
- Check beforehand the compatibility of the silicone adhesive with the material to which it will be applied.
- Remove the embossed PVC liner before placing the tape on the surface.
- Position the tape evenly, avoiding folds, wrinkles or areas of uneven contact.
- Apply sufficient pressure over the entire adhesive surface to ensure proper contact with the substrate.
- Avoid excessive tension during installation, which could cause deformation or lifting at the edges.
Non-stick protection for heat-sealing bars with PTFE-coated fabric tape
David, maintenance manager at a company specialising in food packaging, needed to improve the performance of the heat-sealing bars on his vacuum packaging machines. Film sticking to the hot surfaces caused frequent stoppages for cleaning and maintenance.
After analysing the requirements, ATyT recommended the 130 µm PTFE-coated fabric tape, made with fibreglass and PTFE, silicone adhesive and an embossed PVC liner. Its non-stick surface and resistance to temperatures of up to 300 °C for 30 minutes made it a suitable solution for protecting the equipment.
During installation, David applied the Teflon tape for heat sealers to the sealing bars, first removing the liner and ensuring even placement. The PTFE surface made it easier to release the film after each heat-sealing cycle.
Thanks to this solution, he was able to reduce unwanted sticking, make maintenance tasks easier and support the continuity of the packaging process, improving the performance of the equipment.
Frequently asked questions
PTFE-coated fabric adhesive tape is used to protect, insulate and line industrial components that require resistance to high temperatures and non-stick properties. It is particularly suitable for heat-sealing machines, vacuum packaging equipment, roller lining and other applications where friction needs to be reduced and unwanted adhesion avoided.
ATyT's high-temperature tape can withstand thermal cycles of up to 300 °C for 30 minutes and temperatures of up to 260 °C for 8 hours, according to the tests stated in its technical data sheet. These values correspond to specific exposure periods and should not be interpreted as continuous, unlimited resistance.
Yes. Teflon tape for heat sealers is designed for applications that require a non-stick, heat-resistant surface. Its fibreglass and PTFE backing protects the contact areas of heat-sealing equipment and makes it easier to separate the processed materials.
Teflon tape with silicone adhesive incorporates a pressure-sensitive adhesive that provides an adhesion to steel of 3 N/cm. This formulation allows the tape to be fixed to compatible surfaces and offers suitable performance under thermal demands, making it easy to apply and later remove depending on the conditions of use.
The embossed PVC liner protects the adhesive surface of the PTFE-coated fabric tape during storage, cutting and handling. Its structure makes the material easier to prepare and position, especially in industrial applications that require precision. The liner must be removed before applying the tape.
Yes. Tape for vacuum packaging machines can be used as a protective and separating element in the heat-sealing areas of compatible equipment. Its PTFE surface has non-stick properties that help prevent packaging materials from sticking to hot surfaces during operating cycles.
The term PTFE tape can refer to different tape constructions that incorporate polytetrafluoroethylene. ATyT's fibreglass and Teflon tape uses a fabric reinforced with fibreglass and PTFE, combining the non-stick properties of the polymer with the mechanical strength of the textile backing. This product has a tensile strength of 170 N/cm.
ATyT offers a range of PTFE-coated fabric tape in thicknesses of 130, 180 and 250 µm for different industrial needs. The version with embossed PVC liner described in this data sheet is 130 µm thick. We recommend checking the availability and specific characteristics of the other versions.
More than 1,500 customers have already placed their trust in ATyT.
Do you want to offer adhesive solutions that are up to the task of your projects?
Contact our technical team, and we’ll help you choose the adhesive tape that best suits your needs.