Resistant and permanent polyester tape. Good resistance to high temperatures. Especially suitable for fixing forex or other advertising media with direct focus that cause high temperatures.
- Is an assembling system consisting a thin carrier (paper, non woven, film or others),
coated on both sides with a uniform layer of adhesive.
- The adhesives used are pressure-sensitive acrylic polymer or synthetic rubber based formulations.
- Is produced in roll or sheet format
Consists of a thin polyester
film coated on both sides with a modified
acrylic adhesive. It offers an excellent balance
of high shear resistance, very good initial tack
and superior adhesion level to ensure reliable
bonding strength even to low energy substrates
such as PP or PE.
Has outstanding holding
power, also at elevated temperatures, to
support "life-long" permanent bonding
performance. Is produced in
self-wound format on red polypropylene,
siliconized on both sides.
For fixing of bars, borders, profiles, PVC extrusion, furniture trims, ornamental screens and cable
ducting, battery pack fixing. For joining or splicing of paper, textiles, synthetic and metal films. It is
appropriate for rough or structured surfaces. White Goods Industry : Mounting of nameplates,
emblems and backprinted graphics.
|Quick Tack (N/25mm) on
stainless steel||32||FTM 9|
|Peel 180°- (N/25mm)|
on stainless steel
- after 20 minutes
- after 24 hours
Shear on stainless steel
1kg-25 mm x 25mm (hours)
|> 2000||FTM 8|
|Tensile (N/15mm) (min.)
|Elongation (%) (max.)
Minimum application temperature + 2°C
End-use temperature range -40°C to +160°C
Short term resistance + 175°C S.A.F.T. 500grs
RELEASE LINER THICKNESS (Carrier+Adhesive)
Red MOPP 50 µ ISO 534
180 µ ISO 534